网站转让 → 您的公司名称

传统的水泥化粪池是用混凝土水泥材质做成的，这种化粪池的特点就是抗压，但是人们慢慢发现了它的缺点，不是整体的，需要一个一个的小化粪池拼起来才能使用。后来又出现了玻璃钢化粪池，它是整体成型，安装简便，解决了繁杂的人力与物力，但是玻璃钢的又不抗压，而且安装要求非常高。在这种情况下出现了整体预制混凝土一体式化粪池，水泥一体式化粪池制作要求罐体外表面应该光滑、无裂纹、色泽均匀、罐体没有明显划痕。水泥一体式化粪池内部壁面应为富树脂层，表面应光滑平整，不应有玻璃纤维，目测无可见裂纹、划痕、瑕疵及白化分层等。一体式化粪池清掏孔直径不应小于50厘米，高度不应小于10厘米，边缘应整齐，厚度应均匀、无分层聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛，加工断面应加封树脂。三格的化粪池至少要设置两个清掏孔。
The traditional cement septic tank is made of concrete. The characteristic of this kind of septic tank is compression, but people gradually find its shortcomings. It is not a whole, and it needs small septic tanks to be put together. Later came the glass fiber reinforced plastic septic tank, it is integral molding, easy to install, to solve the complex human and material resources, but the glass fiber reinforced plastic is not compressive, and the installation requirements are very high. In this case, the integral precast concrete integrated septic tank appears. The production of cement integrated septic tank requires that the external surface of the tank should be smooth, no cracks, uniform color, and no obvious scratch. The internal wall of cement integrated septic tank shall be resin rich layer, and the surface shall be smooth without glass fiber. There shall be no visible crack, scratch, defect and albino layer by visual inspection. The diameter and height of the cleaning hole of the integrated septic tank shall not be less than 50 cm and 10 cm respectively, the edge shall be neat, the thickness shall be uniform and there shall be no layering, and the processing section shall be sealed with resin. The septic tank with three compartments shall be provided with at least two cleaning holes.