保定市化粪池模板厂

化粪池的施工其实非常简单：

The construction of the septic tank is very simple:

第一步：挖坑，按需要做的化粪池大小挖坑。

The first step is to dig holes and dig holes in the septic tanks as required.

第二步：池底用混凝土找平。

The second step: the bottom of the pool is leveled with concrete.

第三步：红砖砌筑三格式化粪池，然后抹灰做好防水。

The third step: red brick masonry three format septic tank, and then plastering to do waterproof.

第四步：封盖。

Fourth step: cover.

施工很简单，很多粉丝留言是不是能有完整的图片教程，后续我们的施工中有设计化粪池的施工，将会拍视频教程和图文教程分享给大家，敬请期待。

The construction is very simple, many fans message is not able to have a complete picture tutorial, follow up our construction of the design of the construction of septic tanks, video tutorials and tutorials will be taken to share to everyone, please look forward to.

施工简单，重要的保定平面设计培训 保定室内设计培训 保定空调移机 保定太阳能维修 保定厨房排烟 雄安管道通风 就是一些关键点的工艺。

The construction is simple, and the important points are some key points.

三个池子的容积比一般为2：1：3，在宽度和深度一样的情况下，也就是说一池，二池，三池的长度比应该为2：1：3如图所示：

The volume of the three pool is more than 2:1:3, and in the same width and depth, that is, a pool, two pools, and three pools should be compared to 2:1:3 as shown in the figure.